Hardfacing Alloy
Thermal Spray Wire
Welding Consumables
Product Show
Thermal Spray Wire >> Nickel Based Alloy >> Inconel 625
 

Description
Inconel 625 is a high purity nickel-chrome-moly wire specifically designed for arc and flame spray systems. It can produces dense, well bonded coatings resistant to high-temperature oxidation and corrosion. and stress cracking in caustic mediums. It can equivalent to: Tafa 71T, Sulzer Metco 8625.

Applications
Protective coatings against corrosive gases, protection against scaling of conventional low-Inconel steels, build up oatings for dimensional restoration,Oxidation and Heat resistant Coatings, Corrosion Resistance.

Product Details
Chemical composition

Grade Chemical composition(%)
Ni Cr Mo Nb+Ta Fe Al Ti C Mn Si Cu P
Inconel 625 Min 58 20~23 8~10 3.15~4.15 Max 5 Max 0.4 Max 0.4 Max 0.1 Max 0.5 Max 0.5 Max 0.5 Max 0.015
Physical Properties
Grade Density Melting Point
Inconel 625 8.4g/cm3 1290ˇăC-1350 ˇăC

Typical Characteristics

Typical Hardness Bond Strength Deposit Rate Deposit Efficiency Machilityineab
HRB 92 7000 psi 11 lbs /hr/100A

70%

Good

Sizes & Packaging

Diameter Packaging Wire Weight
1/16ˇ± (1.6mm) MIG (D 300) 15kg((33 lb)/spool
Note that special sizes, or packing requirements are available on all requests. 
Copyright © 2010-2018 Shanghai AlloTech Industrial Co., Ltd. All Rights Reserved